Problem in running AP firmware loader

[Jeronimusch]

Hi,

I just wanted to chare my journy to help out others with this isseu. I've read all the forum posts, the manual and headed off trying to upgrade the VP. None the less first mistake was the Windows 11 first try around that is my fault read the forum and it was clearly mentioned... next issue to get a win10 machine luckily my sons has the oldest school laptop and indeed a win10 unit.

went through the steps no luck tried many times looked on the web for guidance dll issues fixes updates the lot...finaly 1 component wasn't done on the win10 upgrade updates and a quality patch that fixes the MSVS c++ problem... once done the falshing of the HDMI and new frimware was done in only a few minutes and success.

long story short first make sure the win10 has done all the upgrades before attempting the upgrade on the VP.

cheers,
J.

[bobkatz]

Hi, Pavel. Any progress in getting Windows 11 to work with the firmware uploader? I have to jump through hoops, remove the Vanity from my rack and bring it upstairs and connect it to my iMac running Parallels.... that's really really really awkward. Sorry.

[Milan]

Hello Bob,

I am afraid, this implementation will take us some more time than expected, so our current estimation we could have a working solution is somewhere around June/July.

Regards,
Milan

[bobkatz]

Milan Wrote:
-------------------------------------------------------
> Hello Bob,
>
> I am afraid, this implementation will take us some
> more time than expected, so our current estimation
> we could have a working solution is somewhere
> around June/July.
>
> Regards,
> Milan

Understood. Thanks for trying and for being there.

Bob